how to turn on macbook air that wont turn on

Nevertheless, it is a procedure that still works. If holding down the power button for longer than usual doesn't work, reset the PRAM.Īt one time, resetting the PRAM was the most recommended option for restoring an Apple, but judging from the literature that doesn't seem to be the case now. But this way, you solved your RAM issue *and* got back a functional computer. The key point to recovering a saved-state document is to reboot from the drive/account where it exists my guess is that you could have pulled the drive, attached it to another Mac, booted from the external drive, and recovered it that way. Odds are, the document wasn't in the RAM any more it was on the drive, but in that suspended-state mode where it wouldn't appear as a normal file if you pulled the drive and examined it as an external drive. The same thing happens if the battery dies once you plug into AC and power it up again, the state at battery death is restored. That way, when the computer wakes from sleep, it restores all open documents/applications in the state they were in when sleep started. If you're using 10.9 or later (is that right? Or was it 10.8?), and the MBP went to sleep before the spilling crisis, it would have saved the file to the disk in 'preservation of state' mode. If that doesn't work, the next step is to replace the RAM - preferably with sticks that you've seen working in another computer, so you can be sure they're good.

Then reinstall, reassemble and reboot, and see if anything changes. I like to use a pink pencil eraser to rub the RAM contacts clean of scuzz, and use a soft, dry toothbrush to brush the rubber crumbs off the RAM contacts and clean the inside of the RAM socket. The process for installing/removing RAM on the earlier A1181 Core Duo MacBook is identical.

The first thing to try is to reseat the RAM correctly:

Have you been playing arond with RAM recently, or has the computer gotten knocked around? Intel-based Mac Power On Self Test RAM error codes When the computer has a RAM issue (like the RAM's failed, or the computer can't detect it, or it can detect it but it's an incompatible type), hitting the power button causes one or more beeps, sometimes accompanied by a blinking sleeplight: It sounds like something's going on with your RAM.

How to turn on macbook air that wont turn on